If you’re looking to shade a large outdoor area, square or rectangular sails might be your best bet. Just be aware that because of their larger size, they may require sturdier support structures than their triangular counter-parts.
Hardware kits can be selected below or browse our hardware store for other hardware.
Poles and hardware are not included. Hardware can be purchased separately.
From: $350.00
(Shipping Calculated at Checkout)
**IMPORTANT** When calculating the size of the shade sail that you would need for a certain area, be sure to allow for about 12 to 18 inches of space between the shade sails corner d-rings and the mounting points for the necessary mounting hardware including turnbuckles. It is better for the shade sail to be too small than too large. If it is too large, you will not be able to tighten when necessary, but if it is too small, you can still attach the sail to the mounting points with the help of a few lengths of chain or a piece of aircraft cable.
Due to fabrication tolerances and fabric stretch, finished shade sail dimensions may vary +/- 2 inches. Due to fabric width and depending on the size of the shade sail the finished sail may have seams.
All shade sails are made to order and therefore all sales are final. No returns or refunds will be accepted.
Click here for further instructions on how to measure your shade sail using the attachment point method
Click here for further instructions on how to measure your shade sail using the attachment point method
Click here for additional hardware you may need for your project.
Click here for additional hardware you may need for your project.
*** Hardware Mounting equipment is NOT automatically included with your shade sails purchase. Add on a mounting kit to ensure you have everything you need to install your shade sail***
We exclusively offer SolaMesh hardware which is made from high-strength stainless steel 316 and is built to hold under maximum tension.
Please note, add-on Kits are for metal pole attachment points only. If any anchors awill be attached to any other point other than a metal pole, please look through our hardware product page and select the appropriate hardware needed.
Rectangle options (all include: 4 turnbuckles, 4 eye bolts w/ nut & washer, 2 D-Shackles).
Triangle options (all include: 3 turnbuckles, 3 eye bolts w/ nut & washer, 2 D-Shackles).
We Offer Installation!
We are excited to offer installation services across most of the contiguous state of Texas. In order to obtain a quote, please email, call, or simply add the product of your choice to a quote, fill out a little information and be sure to check the box to request installation pricing. For installation, be sure the area is free of debris and any underlying issues that would make digging difficult. Each customer takes responsibility for their own site prep, permitting, and mulch/surfacing unless otherwise arranged. We do not take responsibility for permitting — you should consult your local authorities or construction professionals as needed.
Yarn | Knitted UV-stabalized HDPE |
Construction | Monofilament & tape |
Pattern | Lock-stitch knitted |
Temperature range (C°) | -30 to +70 |
Approximate thickness (mm) | ~1.6 |
Tensile strength- warp(N/50mm)(AS 2001.2.3.1) | 670 N/50mm |
Elongation at break- weft(%) (AS2001.2.3.2) | 117% |
Wing tear-warp(mean) (AS2001.2.10) | 184N |
Wing tear- weft (mean) (AS2001.2.10) | 347N |
Burst pressure (kPa) (AS4878.5- Method B) | 3500 kPa |
Burst force (N) (AS2001.2.19) | 1937 N |
Flammability Index (range0-100) | 12 |
Lead | Not detected |
Pthalate | Not detected |
. Statement of Limited Warranty:
© 2022 All rights reserved